0

Nitrogen Gas Filter

Nitrogen Gas Filter
Nitrogen Gas Filter
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 10000 INR
    Product Specifications
    • Industrial
    • ¼” NB to 30” NB
    • Gas Filtration
    • As per Design
    • New
    • Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
    • 0.01 Micron to 6000 Micron & More
    • Cartridge Filter
    • Fiber Glass
    • As per Design
      Product Description

       

      We offer Nitrogen Gas Filter with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design nitrogen gas filter with various parameters of nitrogen gas like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer natural gas filter with Aluminium, CS and SS housings. Nitrogen Gas Filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from nitrogen gas. 

      Nitrogen Gas filters classified under below categories:
      MS – Moisture Separator
      For the removal of 99% of bulk oil/water removal from the natural gas.

       

      SB – Pre Filtration
      Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns.

      PF – High Efficiency Fine Filter

      For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.UF – High Efficiency Oil Removal Filtration

      For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.]AC – Activated Carbon Filtration

      For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

      Technical Parameters:

      • Line Size: ¼” NB to 30” NB
      • End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld,  NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
      • Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
      • Operating Pressure: 0 to 50 Bar
      • Operating Temperature: 15 Deg. C to 500 Deg. C
      • Flow Rate : Up to 80,000 NM3/Hr. & More
      • Filtration Rating : 0.01 Micron to 6000 Micron & More
      • Top cover with nut & bolts type or quick opening type

       

      Advantages:
      Easy to clean
      Low Pressure drop
      Large area
      Easy to operate and maintenance
      Positive Sealing to prevent bypass
      Customized design
      High dirt load
      holding capacity

      Applications:

      • Refineries and Petrochemicals
      • Power Plants
      • Oil & Gas
      • Water filtration and Cooling Towers
      • Chemical Industries
      • Automobile Industries
      • Steel Industries, Metals & Minerals
      • Textile Industries
      • Dairy and Food Industries
      • Dyes, Inks and paints Industries
      • Cement Industries
      • Fertilizers Industries
      • Pharmaceuticals
      • Coolant Oils and Cutting Fluids

       

      Trade Information
      • Cheque, Cash in Advance (CID), Cash Advance (CA), Cash on Delivery (COD)
      • 50 Per Month
      • 4 Week
      • Wooden Box
      • ISO 9001:2015
      Contact Us

      A Wing, 4th Floor, 10 & 11, Signet Plaza, Kunal Char Rasta, Samta Gotri Road, Gotri, Vadodara, Gujarat, 390021, India
      Phone :+918037400633